• <s id="qi26a"><tbody id="qi26a"></tbody></s>
  • <code id="qi26a"><tbody id="qi26a"></tbody></code><button id="qi26a"></button>
  • 產品搜索 Search
    產品目錄 Product catalog

    產品名稱:

    電流探頭| CT6

    更新時間:2024-09-07

    產品型號:CT6

    產品報價:

    產品特點:電流探頭| CT6 Specified rise time and bandwidth are obtained when using the probe cables provided: The P6041 cable used with the CT1 and CT2 is 42 inches nominal. If additional length is required, the ca

    CT6電流探頭| CT6的詳細資料:

    電流探頭| CT6

    電流探頭| CT6

    Features & Benefits

    • High Bandwidth
    • Ultra-low Inductance
    • Very Small Form Factor
    • Characterize Current Waveforms up to <200 ps Rise Times
    • Very Low Loading of Circuit Under Test
    • Fits Into Dense, Closely-spaced Circuit Designs

    Applications

    • Data Storage Read Channel Design
    • Silicon Characterization
    • High-frequency Analog Design
    • ESD Testing
    • Signal Injection
    • Differential Current Measurements
    • Single-shot Low Rep-rate Pulse Measurements
    • Propagation Delay Measurement

    CT6 Current Probe

    The CT6 is the newest addition to the Tektronix portfolio of high-frequency current probes. It is designed to meet the needs of high-speed circuit design and test applications which require ultra-high bandwidth, low inductance, and extremely small form factor. The CT6 provides up to 2 GHz bandwidth when used with high-bandwidth oscilloscopes such as the Tektronix TDS694C, TDS794D, and TDS7000 Series oscilloscopes or with other compatible 50 Ω input measuring instruments. Low inductance (<3 nH) assures that the loading effect of the CT6 on the circuit-under-test will be negligible, which is especially important for today's low-amplitude, high-speed circuit designs such as disk drive read/write preamplifiers. The probe is a closed-circuit design which will accept uninsulated wire sized up to 20 gauge. This product is exempt from CE mark by virtue of its 30 V voltage limit.

    CT1/CT2 Current Probes

    The CT1 and CT2 Current Probes are designed for permanent or semi-permanent in-circuit installation. Each probe consists of a current transformer and an interconnecting cable. The current transformers have a small hole through which a current carrying conductor is passed during circuit assembly.

    The P6041 Probe Cable provides the connection between the CT1 and CT2 Current Transformers and a BNC oscilloscope input. A 50 Ω termination is required to terminate the cable when connected to a high-impedance (1 MΩ) oscilloscope input. One probe cable can be used to monitor several current transformers that have been wired into a circuit.


    CT1/CT2. Current Probes with P6041 BNC Probe Cable.

     

    Miniature Construction

    The CT1 and CT2 detachable cable design enables one or more probes to be located on circuit boards or in other limited space areas.

    The CT6 offers the smallest form factor available, for measurement on ever-shrinking circuit boards and components. It is designed for temporary installation and does not incorporate removable cables, as the CT1 and CT2 do.

    Extendible Probe Length

    Specified rise time and bandwidth are obtained when using the probe cables provided: The P6041 cable used with the CT1 and CT2 is 42 inches nominal. If additional length is required, the cables can be extended by using high-quality 50 Ω cable and suitable interface connectors. (Also see Special Probe Cables, Optional Accessories.) Long cables may degrade high-frequency response.

    High Sensitivity

    The CT1 and CT6 provide an output of 5 mV for each milliamp of input current when terminated in 50 Ω. The CT2 provides 1 mV per milliamp when terminated in 50 Ω.

    Typical Systems

    The CT1, CT2, and CT6 high-frequency current transformers are dynamic (i.e., non-DC) current measuring devices. They are typically used in conjunction with compatible high-bandwidth oscilloscopes and other instruments to observe and/or record high-frequency current waveforms. The CT1, CT2, and CT6 normally operate directly into 50 Ω scopes and other measuring device inputs.

    The CT1 or CT2 can be used with 1 MΩ input systems; use the P6041 probe cable and terminate the output with a 50 Ω feed-through termination (see Optional Accessories).

    In all cases, the CT1, CT2, and CT6 must work into 50 Ωs to obtain specified performance and sensitivity.

     

     如果你對CT6電流探頭| CT6感興趣,想了解更詳細的產品信息,填寫下表直接與廠家聯系:

    留言框

    • 產品:

    • 您的單位:

    • 您的姓名:

    • 聯系電話:

    • 常用郵箱:

    • 省份:

    • 詳細地址:

    • 補充說明:

    • 驗證碼:

      請輸入計算結果(填寫阿拉伯數字),如:三加四=7

    滬公網安備 31011402002799號

    一本大道无码日韩精品影视| 日韩精品无码一区二区三区AV| 一二三四在线观看免费中文在线观看 | 精品人妻大屁股白浆无码| 中文字幕在线免费观看| 色视频综合无码一区二区三区| 精品国产aⅴ无码一区二区| 亚洲VA中文字幕不卡无码| 99精品一区二区三区无码吞精 | 亚洲AV无码成人精品区蜜桃| 亚洲欧美日韩一区高清中文字幕| 免费A级毛片无码A∨| 亚洲级αV无码毛片久久精品| 中文字幕在线最新在线不卡| 国色天香中文字幕在线视频| 亚洲精品无码不卡| 国精品无码一区二区三区在线| 亚洲AV无码精品色午夜果冻不卡 | 中文字幕无码久久人妻| 中文字幕乱码久久午夜| 永久无码精品三区在线4| 国产强伦姧在线观看无码| 成人免费无码H在线观看不卡| 无码专区中文字幕无码| 亚洲AV永久无码精品一百度影院| 国产在线拍偷自揄拍无码| 亚洲精品人成无码中文毛片| 曰韩中文字幕在线中文字幕三级有码| 亚洲中文字幕日本无线码| 亚洲免费无码在线| 精品无码无人网站免费视频| 在线观看片免费人成视频无码| 久久水蜜桃亚洲av无码精品麻豆| 日韩精品无码免费专区午夜| 高清无码中文字幕在线观看视频| 久久精品中文字幕有码| 佐佐木明希一区二区中文字幕| 最近完整中文字幕2019电影| 线中文在线资源 官网| 中文字幕不卡高清视频在线 | 中文字幕在线免费看线人|